Device Webpage
The signature pad has a web interface where you can upload documents or change the device settings. The device address is shown on the device screen after startup. If your device is already configured with promo screens or a promo video, you will see this informational screen only in the first 30 seconds after the device starts. If you missed the screen, just unplug the USB cable and reconnect it again.
...
Setting - Page
The setting page can be access accessed with the “Gear wheel” Wheel” icon from the blue site bar.
...
You can change the following setting settings on this page:
Setting passwords to access the device pages. With the “START PAGE PASSWORD” PASSWORD,” you can limit the access to the signature functionally. If you set this password, you will be forced to enter the password it every time you open the webinterface web interface of the device (or when you're using the API Interface). With the “GALLERY PASSWORD” and “SETTING PASSWORD” PASSWORD,” you can prevent the user access to this from accessing these pages.
Network settingsettings, which include the device name and the option to get the IP address by DHCP, or you can set the IP manually.
Certificate Settings, here : Here you can change the HTTPS Certificate certificate on the device. This is, for example, required when you changed change the device name and you still want to used use HTTPS without any warning. The reason is that the device name is also the hostname for which the factory certificate was created. You can find more details here.
Filetype File type restriction , allows you to limit the upload to specific file typstypes, for example, to prevent the upload of new Firmware Update firmware update files by users.