Device Webpage
The signature pad has a web interface where you can upload documents or change the device settings. The device address is shown on the device screen after startup. If your device is already configured with promo screens or a promo video, you will see this informational screen only in the first 30 seconds after the device starts. If you missed the screen, just unplug the USB cable and reconnect it again.
...
Option | |
|---|---|
Show manual | This is the default option of each signature device, and it means that you will see the info screen with the IP address and Hostname hostname of the signature device while the device is in standby mode. |
Show pictures | You can upload up to 4 four pictures to the device, which will be shown while it is on standby. The ideal resolution is 1024x600 1024 x 600 pixels, and the images will be shown in a an endless loop. If you want to upload a an image, you have to click on the cloud icon, or you need to drag and drop your image into the area. You can also set a timer for how long each image should be displayed. You need to confirm each image with the green disk icon. If you wan would like to delete a an image, you need have to click on the red thrash trash icon. |
Show video | You can also upload 1 a video to the device for the standby mode. The video needs to have specific settings; therefore, therefor please use our video - converter tool. |
Setting - Page
The setting page can be access with the “Gear wheel” icon from the blue site bar.
...
Setting passwords to access the device pages. With the “START PAGE PASSWORD” you can limit the access to the signature functionally. If you set this password you will be forced to enter the password every time you open the webinterface of the device (or when you using the API Interface). With the “GALLERY PASSWORD” and “SETTING PASSWORD” you can prevent the user access to this pages.
Network setting, which include the device name and the option get the IP address by DHCP or you can set the IP manually.
Certificate Settings, here you can change the HTTPS Certificate on the device. This is for example required when you changed the device name and you still want to used HTTPS without any warning. The reason is that the device name is also the hostname for which the factory certificate was created. You can find more details here.
Filetype restriction, allows you to limit the upload to specific file typs, for example to prevent the upload of new Firmware Update files by users.