Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Download of the Root Certificates. The required depends on the manufacture of your device, if you are unsure about this you can find the manufacture information on the info page of your device.

...

...

StepOver GmbH

View file
nameHWRootCertificateStepOverEuropa4096.der

View file
nameHWRootCertificateStepOverEuropa4096Intermediate.der

StepOver International GmbH

View file
nameHWRootCertificateStepOverInternational4096.der

View filenameHWRootCertificateStepOverInternational4096Intermediate.derStepOver GmbH

https://www.stepoverinfo.net/download.php?file=HWRootCertificateStepOverEuropa4096.zip

StepOver International GmbH

https://www.stepoverinfo.net/download.php?file=HWRootCertificateStepOverInternational4096.zip

  1. Extract the Zip file on your system and open the location with the Finder

  2. Double click HWRootCertificateStepOverEuropa4096.cer (or HWRootCertificateStepOverInternational4096.der by the International)

    1. Confirm the installation with your Login

      image-20240115-111911.pngImage Added

    2. You will see the StepOver (International) Hardware Root CA (4096) inside your certificate list

      image-20240115-112320.pngImage Added

    3. Next you need to right click on the certificate and select to check the it.

      image-20240115-112631.pngImage Added
    4. A new window with information about the certificate will popup. Extend the trust option

      image-20240115-112929.pngImage Added
    5. You need the certificate to be trusted with the first option

      image-20240115-113058.pngImage Added
    6. Confirm this change with your login and repeat the same for the second certificate by double clicking on the HWRootCertificateStepOverEuropa4096Intermediate.cer (or HWRootCertificateStepOverInternational4096Intermediate.cer)

    7. After you installed both certificates and set them to be trusted you should see them inside your certificate list

      image-20240115-113607.pngImage Added
  3. With the installation in your personal certificate store, your browser should already open the https Version of the device website without any warning.

    image-20240115-113938.pngImage Added
  4. If you want that Adobe Reader shows a green check of the signature instead of the yellow warning, you need to import the certificates also inside the Reader.

    image-20240115-114219.pngImage Added
    1. For that open the Settings

      image-20240115-114322.pngImage Added

    2. Select the categorie “Signatures” and select there the Identity and trusted certificates

      image-20240115-114503.pngImage Added
    3. Select on the left side the trusted certifcate, next click on “import”. In the new window you need to click on “Browse…”

      image-20240115-115003.pngImage Added
    4. Select now HWRootCertificateStepOverEuropa4096.cer (HWRootCertificateStepOverInternational4096.cer) and repeat the same for the HWRootCertificateStepOverEuropa4096Intermediate.cer (HWRootCertificateStepOverInternational4096Intermediate.cer)

      image-20240115-115044.pngImage Added
    5. You should have now both certificates inside your list

    6. Select in the top list one of the certificates and then select it in the upper list again. Next click on “Trust…”

      image-20240115-115743.pngImage Added
    7. In the new Window you need to enable the checkbox “Use this certificate as trusted root” and confirm it with OK

      image-20240115-115513.pngImage Added
    8. Repeat the same with the other certificate and finish the certifcate import with button “Import”

      image-20240115-115911.pngImage Added

    9. You should get the confirmation that both certificate were imported

      image-20240115-120018.pngImage Added
    10. Confirm this message and close the other window.

    11. Your Adobe Reader should now show a green check

      image-20240115-120155.pngImage Added