Versions Compared

Old Version 66

changes.mady.by.user Editor

Saved on

compared with

New Version 67

changes.mady.by.user Editor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

English

Introduction

Print2NG is a virtual printer driver that converts print data into PDF files and sends them to a NextGen pad, such as the "duraSignPad NG 10" from the NextGen series. You can start the printing process from any application that supports printing, and then sign the generated PDF file on the pad. You can either select a specific NextGen pad to send the document or display a device selection dialog that shows all available NextGen pads. 

During the signing process, Print2NG mirrors the view of the NextGen pad, allowing the person at the PC to follow the signer’s actions in real-time. To assist the signer, the mirrored buttons on the pad can also be operated from the PC.

image-20240527-102953.png

After the signature is completed, the document can be saved using the download button on the pad or in the mirrored display. There are two options for this: Print2NG can either show the user a "Save As" dialog or save the signed PDF files automatically to a specified directory. After saving, Print2NG can either be closed or minimized, allowing the user to continue their work seamlessly.

Installation Process

  1. Double-click on the setup file to begin the installation process and click “Next” to continue.

    2024-05-27 03_32_56-Setup - Print2NG 1.10-20240527-103342.png

  1. Read through the license agreement, if you agree the terms, click on the checkbox “I accept the agreement” and click “Next”.

    2024-05-27 03_34_16-Setup - Print2NG 1.10-20240527-103424.png



  1. Select the installation folder and click “Next”. By default, the directory is set to “C:\Program Files\StepOver\Print2NG”.

    2024-05-27 03_34_36-Setup - Print2NG 1.10-20240527-103444.png



  1. After selecting the desired directory and clicking “Next,” the files will be copied to the chosen directory.

    2024-05-27 03_35_17-Setup - Print2NG 1.10-20240527-103521.png



  1. Complete the installation by clicking “Finish.” Optionally, you can choose to start Print2NG immediately by checking the box.

    2024-05-27 03_35_54-Setup - Print2NG 1.10-20240527-103603.png

  2. Print2NG wurde erfolgreich installiert.

The setup can also be installed automatically using parameters, more information can be found here.

User Interface

Starting Print2NG, the following interface will be displayed:


image-20240523-094306.png

If a signing device has been added, the name and the IP address of the signature pad is displayed at the top left on the interface.
Three buttons are available in this view:

  • Search device: You can use this button to search for connected or available NextGen in the network and select the desired one.

  • Settings: Here you can adjust the application settings.

  • Help: This button provides access to help resources.

In the centre of the screen is a field with a cloud icon. Here you can drag and drop a PDF or XML file to sign.

Settings and Options

Select Language

  • Here you can change the language.

About

  • Here you get information about current version of Print2NG.

 Device Configuration

  • Show Device Dialog: Opens a window displaying all available signature devices and their respective descriptions.

  • IP Address: Allows manual input of the device's hostname or IP address.

  • Use HTTPS: Enables the use of HTTPS for secure connections.

  • Device Password: Allows entry of the password if a password is required for the signature pad.

 File Handling

  • Open files from following directory: Defines the default directory for opening documents.

  • Save last used directory: Remembers the last selected opening directory and makes this change automatically in the settings.

  • Save files into following directory: Defines the default directory for saving documents.

  • Save last used directory: Remembers the last used saved directory and applies this change automatically in the settings.

  • Do Not Show Save Selection: Saves the file with a standard name without showing a selection dialog.

  • Attach date and time to the saved document: When the signed document is saved, the date and time are attached to the file name.

Application Settings

  • Startup Behavior: Sets whether the application starts maximized or minimized.

  • Auto Minimize After Signing: Minimises the application automatically after signing a document.

  • Auto Close After Signing: Closes the application automatically after signing a document.

 Log File

  • Log file output Path: Displays the path to the log file.

  • Browse directory: Allows browsing the log directory.

  • View logs: Displays the existing log files.

  • Delete logs: Deletes the log files.

Basic Use

First steps based on an example:

  1. Open the Document: Open a Word document that you want to convert to a PDF and sign.

  2. Print as PDF: Click on “File” and select “Print”.

  3. Select Printer: Choose “StepOver Print2NG” as the printer and click “Print”.

    image-20240523-103424.pngImage Removed


    image-20240527-110037.pngImage Added


  4. Document in Print2NG: Print2NG will open, displaying your document as a PDF on the screen and on the NextGen pad, ready for signing.

    image-20240523-094509.png


  5. Sign the Document: Sign the document on your NextGen pad. Afterward, you can save the signed PDF document.

Alternatively, Print2NG can also be started via the start menu. To automate the signature process, you have the option of initiating the tool via an external application or a batch file with the desired parameter.

In addition to transferring a PDF file, you can also submit a NextGen-specific XML file to Print2NG. This allows you to further automate the signing process on the pad by specifying the signature positions. You can find the documentation for the XML here.

Info

To create a shortcut, enter the name Print2NG in the search bar of the start menu. When Print2NG appears in the list of search results, right-click on it. Select the "Open file path" option in the context menu. This will open the file explorer and display the executable file of Print2NG. Right-click on the file and select "Send to" and then "Desktop (create shortcut)".

…

...