IntroductionPrint2NG is a virtual printer driver that converts print data into PDF files and sends them to a NextGen pad, such as the "duraSignPad NG 10" from the NextGen series. You can start the printing process from any application that supports printing, and then sign the generated PDF file on the pad. You can either select a specific NextGen pad to send the document or display a device selection dialog that shows all available NextGen pads. During the signing process, Print2NG mirrors the view of the NextGen pad, allowing the person at the PC to follow the signer’s actions in real-time. To assist the signer, the mirrored buttons on the pad can also be operated from the PC. 
After the signature is completed, the document can be saved using the download button on the pad or in the mirrored display. There are two options for this: Print2NG can either show the user a "Save As" dialog or save the signed PDF files automatically to a specified directory. After saving, Print2NG can either be closed or minimized, allowing the user to continue their work seamlessly.
Installation ProcessDouble-click on the setup file to begin the installation process and click “Next” to continue.
Read through the license agreement, if you agree the terms, click on the checkbox “I accept the agreement” and click “Next”.
Select the installation folder and click “Next”. By default, the directory is set to “C:\Program Files\StepOver\Print2NG”.
After selecting the desired directory and clicking “Next,” the files will be copied to the chosen directory.
Complete the installation by clicking “Finish.” Optionally, you can choose to start Print2NG immediately by checking the box.
 Print2NG wurde erfolgreich installiert.
The setup can also be installed automatically using parameters, more information can be found here.
User InterfaceStarting Print2NG, the following interface will be displayed:
 If a signing device has been added, the name and the IP address of the signature pad is displayed at the top left on the interface.
Three buttons are available in this view: Search device: You can use this button to search for connected or available NextGen in the network and select the desired one. Settings: Here you can adjust the application settings. Help: This button provides access to help resources.
In the centre of the screen is a field with a cloud icon. Here you can drag and drop a PDF or XML file to sign.
Settings and OptionsSelect Language
About
Device ConfigurationShow Device Dialog: Opens a window that displays all available NextGen signature devices on the same network along with their respective descriptions IP Address: Allows manual input of the device's IP address. Use HTTPS: Enables the use of HTTPS for secure connections. HTTPS must be enabled on the device too. Device Password: Allows entry of the password if a password is required for the signature pad.
File HandlingOpen files from following directory: Defines the default directory for opening documents. Save last used directory: Remembers the last selected opening directory and makes this change automatically in the settings. Save files into following directory: Defines the default directory for saving documents. Save last used directory: Remembers the last used saved directory and applies this change automatically in the settings. Do Not Show Save Selection: Saves the file with a standard name without showing a selection dialog. Attach date and time to the saved document: When the signed document is saved, the date and time are attached to the file name.
Application SettingsStartup Behavior: Sets whether the application starts maximized or minimized. Auto Minimize After Signing: Minimises the application automatically after signing a document. Auto Close After Signing: Closes the application automatically after signing a document.
Log FileLog file output Path: Displays the path to the log file. Browse directory: Allows browsing the log directory. View logs: Displays the existing log files. Delete logs: Deletes the log files.
|
|---|
Basic UseFirst steps based on an example:Open the Document: Open a Word document that you want to convert to a PDF and sign. Print as PDF: Click on “File” and select “Print”. Select Printer: Choose “StepOver Print2NG” as the printer and click “Print”.
Document in Print2NG: Print2NG will open, displaying your document as a PDF on the screen and on the NextGen pad.
Click on the pen button to sign the document.
 Image Removed
 Image Added
Sign the Document: Sign the document on your NextGen pad and confirm your signature by pressing the green OK button.
 Image Removed
 Image Added
Save document: Afterwards, you can save the signed PDF document using the download button.
 Image Removed
 Image Added
Alternatively, Print2NG can also be started via the start menu. To automate the signature process, you have the option of initiating the tool via an external application or a batch file with the desired parameter. In addition to transferring a PDF file, you can also submit a NextGen-specific XML file to Print2NG. This allows you to further automate the signing process on the pad by specifying the signature positions. You can find the documentation for the XML here. | Info |
|---|
To create a shortcut, enter the name Print2NG in the search bar of the start menu. When Print2NG appears in the list of search results, right-click on it. Select the "Open file path" option in the context menu. This will open the file explorer and display the executable file of Print2NG. Right-click on the file and select "Send to" and then "Desktop (create shortcut)". |
… |