ColourPad

Hardware Plattform	G6
Update to Firmware	5.12E.1.67
Supported Firmware Versions	any since 3.12 (board with open-detection)
Download	https://www.stepoverinfo.net/download.php?file=g6Update-5.12E.1.67_StepOverProductive.zip Steps: download the Firmware Updater run start-FW-Update.bat, the update process will take around 6min after the Update there should be the message that Update was successful and the Pad will show Firmware 5.12E in the bootscreen In case of Problems: in case the update fails try to repeat the update if the pad is without firmware (display stays black and the LED blinks green), you need to run recoverFromBootloader.bat

General