Mobile

Hardware Plattform

G7
Update to Firmware5.03E.1.2020
Supported Firmware Versionsany older Version of naturaSign Pad Mobile (if you have the naturaSign Pad Economy, you can get the Updater here)
Download

https://www.stepoverinfo.net/download.php?file=g7Update-5.03E.0.2020.zip 

Steps:

  • download the Firmware Updater
  • if the device has Firmware 3.x or 4.x, you need to start the Update_from_Firmware_3or4.bat
  • if the device already has Firmware Version 5, you need to start the Update_from_Firmware_5.bat
  • after the Update there should be the message that Update was successful and the Pad will show Firmware 5.03E in the bootscreen

In case of Problems: 

  • in case the update fails, try to repeat the update
  • if the pad is without firmware (display stays black and the LED blinks green), you need to run MobileBl.bat
Additional informationThis firmware version supports our 4096 Bit RSA encryption.