10.0 (US Version)

Hardware Plattform

Steps:

• download the Firmware Updater
• if the device has Firmware 5.x or 6.x you need to start the Update_from_Firmware_5or6.bat
• if the device already has Firmware Version 7 you need to start the Update_from_Firmware_7.bat
• after the Update there should be the message that Update was successful and the Pad will show Firmware 7.09E in the bootscreen

In case of Problems: 

• in case the update fails try to repeat the update
• if the pad is without firmware (display stays black and the LED blinks green), you need to run Update_from_Bootloader(recovery).bat
• in case the update fails with the error which include "crypt wrong?" you are using the wrong updater Version, contact our support (service@stepover.de) for help