Hardware Plattform

Update to Firmware5.05E.0.4014


  • download the Firmware Updater and extract it
  • run Classic.bat, the update process will take around 1min
  • after the Update there should be the message that Update was successful and the Pad will show Firmware 5.05E in the bootscreen

In case of Problems: 

  • in case the update fails try to repeat the update
  • if the pad is without firmware (display stays black and the LED blinks green), you need to run ClassicBl.bat
Additional informationThis firmware version supports our 4096 Bit RSA encryption.